Brand: Haotian film Model: HT-htm006 attached: 14.5PSI = 1BAR 1GPM = 3.785LPM routine maintenance and cleaning: routine maintenance in general ultrafiltration system usually involves ultrafiltrate through attenuation and the degree of recovery amount. Typically effects in the electrophoretic paint ultrafiltration permeate normal operation amount of several factors: the type of paint, the percentage of solids content, temperature, conductivity, PH value, enter the system paint flow, ultrafiltration system inlet pressure, differential pressure and when preprocessing entrained pollutants, while due to several factors affect the normal operation of the ultrafiltration system, and thus a detailed daily record or not, to avoid some potential problems from occurring, and appears accurate solution are has an extremely important aid. After driving through a period of time, ultrafiltration system ultrafiltrate production will stabilize at a flow value, this is normal and stable flow value of this system, when the fluid production fell to a stable value of 70%, the the system must be cleaned, otherwise it will lead to blocking the flow can not be restored. Note: Ultrafiltration systems in daily operation or cleaning process should minimize downtime, ultrafiltration system under abnormal conditions before closing the feed pump or cleaning pump, first slowly close the inlet and outlet valve is fully closed until the final turn off the motor and immediately wash ultrafilter. Remember: The following ultrafiltration membrane concentration to be lethal hazards; a sudden power failure in the workshop, but the system is not the appropriate response to the check valve and other settings; 2, after the shutdown is not timely cleaning of the membrane; 3 When turned on or not in accordance with the provisions of the operation shut down