Brand: anodic film Item: HT-YJM002 Material: Other electrophoretic coating technology is widely used in automobiles, household appliances, hardware and other industries coating line, can give excellent coating properties of the workpiece. Our newly developed membrane anode cathodic electrophoretic coating equipment used, and its excellent performance, the cathode coating process to meet production requirements: 1, has good chemical stability, resistance to oxidation, acid and alkali resistance, in general, resistance to chemical corrosion . 2, electrophoretic coating film resistors meet the requirements. 3, large anions, organic root painted tank can move into the anode compartment through the membrane. 4, low salt diffusion coefficient, due to the blocking effect of the membrane, the anode generated H +, continued to spread to the coating slot compartment, in order to facilitate the control of the PH coated groove changes and variations of bath components, and reduce the loss of active ingredient. 5, high compressive strength, in order to facilitate use of the device. 6, water permeability is small, four meters of water pressure water penetration is less than 0.2ml / h · dm2,30 meters of water only when the more obvious leakage; 7, the film is dry to the wet state, the small size of the change. The film quality indicators as follows: Item Unit Index and the membrane surface resistance Ω-cm2 (0.1N NaCl measured) 0.95% select transmittance> 90 exchange capacity mol / kg (dry)> 1.7% moisture content 25-35 water through Rate ml / MP · cm2 · h0.5 size: 1600mm * 800mm-mail: 2668750499@QQ.COM (Sales) official Taobao shop: http: //shop57177958.taobao.com